2 Part Boat Sun Lounger Cushions – Made to Measure (Instant Quote)

Create made to measure 2 part boat sun lounger cushions designed for foredeck sun pads, cockpit lounging areas and split relaxation seating. This configuration is ideal for boat layouts where cushions are divided into two sections for easier handling, storage or access.

Whether you're replacing worn covers or upgrading your entire sun lounger setup, this product allows you to order exactly what you need with a clean, professional fit.

Order Covers Only or Complete Cushions

This product gives you full flexibility depending on your requirements:

• Covers Only – ideal if your existing foam is still in good condition and you simply want to refresh the look of your boat sun loungers
• Foam & Covers – complete replacement sun lounger cushions, made to your exact dimensions for improved comfort and support

All cushion covers are made to order to match your specified size, thickness and finish.

Important – Fabric Selection

Fabric is sold separately and should be selected once you have added your cushion sizes to the cart.

We strongly recommend allowing us to guide you through the process. Once we have your cushion sizes, we can advise on the correct amount of fabric required, helping you avoid ordering too little or overbuying unnecessarily.

After configuring your cushions (or foam & covers), you can then choose your fabric to complete your order.

Browse Marine & Upholstery Fabrics Here

We offer a wide range of durable, marine-suitable fabrics including water-resistant and hard-wearing upholstery options designed specifically for marine use.

Designed for 2 Part Sun Lounger Layouts

This product is designed specifically for split sun lounger cushions, commonly found on boat foredecks and cockpit relaxation areas.

A 2 part configuration is ideal for:

• Foredeck sun pads with split sections
• Bow lounging areas
• Cockpit sun loungers
• Seating areas requiring access to storage below
• Easier handling, removal and storage

If your sun lounger is made up of two separate cushion sections, this is the correct product for your setup.

Made to Measure for a Precise Fit

Every cushion is manufactured to your exact measurements, ensuring a tailored fit that looks right and performs properly in a marine environment.

• Custom width, length and thickness for each section
• Clean joins between cushion sections
• Professional finish with precise shaping
• Designed to fit snugly within your seating area

This ensures a seamless look across both sections while maintaining practicality.

Built for Marine Use

Boat sun loungers are exposed to some of the harshest conditions onboard. Our cushions are designed to perform in:

• High moisture and wet conditions
• Direct sunlight and temperature changes
• Regular use and movement

When paired with the correct fabric and foam, your sun lounger cushions will deliver long-lasting comfort and durability on deck.

Foam Options Explained – Marine Use

If you choose foam with your cushions, selecting the correct type is critical for performance on a boat.

Reticulated (Dry Fast) Foam – Best for Sun Loungers

For sun loungers, especially on deck, reticulated foam is strongly recommended.

• Open-cell structure allows water to drain straight through
• Dries quickly, preventing water retention
• Helps reduce mould and mildew
• Maintains performance even after repeated exposure to moisture

This makes it the ideal choice for foredeck sun pads, cockpit loungers and all external cushions.

Reflex Foam – For Sheltered Use

If your sun lounger is positioned in a more protected or enclosed area, reflex foam may be suitable.

• Firm, supportive feel
• Comfortable for extended lounging
• Durable for regular use

Choosing the Right Foam

• External sun loungers → Reticulated foam (recommended)
• Sheltered / internal areas → Reflex foam

If you're unsure, we’ll guide you based on how your boat is used.

Moisture Control – Why We Recommend Airmat Spacer

For sun loungers, managing moisture is just as important as choosing the right foam.

We recommend adding a 3D Airmat spacer layer beneath your cushions to improve airflow and reduce the risk of damp build-up.

Why Airmat Matters

• Creates a breathable gap between the cushion and the deck
• Allows air to circulate freely underneath
• Helps moisture evaporate quickly
• Reduces the risk of mould, mildew and trapped condensation

Ideal for Sun Loungers

Deck & Foredeck Cushions
Airmat works alongside reticulated foam to allow water to drain and dry efficiently, keeping cushions comfortable and ready to use.

Cabin or Semi-Exposed Areas
Even in sheltered spaces, Airmat helps prevent condensation forming beneath cushions.

How It Works

Airmat is a thin 3D mesh layer (approx. 8mm thick) placed between your cushion and the seating base. Its open structure allows moisture to escape while maintaining support.

Recommended Setup

• External sun loungers → Reticulated foam + Airmat spacer
• Sheltered loungers → Reflex foam + Airmat spacer (recommended)

This combination significantly improves comfort, drying time and overall lifespan.

Not the Right Configuration?

If your layout is different, you may need an alternative option:

• Boat cushion covers & upholstery
• V berth mattresses & toppers
• Boat deck mattresses & loungers
• Custom shape boat mattresses

Explore our full range of made to measure boat cushion solutions to find the correct fit.

Need Help Before Ordering?

If you’re unsure whether to order covers only or complete cushions, or need help with measurements, our team is here to help.

Add your cushion sizes first and we’ll guide you on the correct setup — including advising how much fabric you need — so you get the right result first time.

Related Products & Options

• Made to measure foam cut to size
• Boat mattresses and V berth cushions
• Custom fitted sheets for marine mattresses